#Canon ip3000 error code manual
#Canon ip3000 error code code

Recently we’ve had a couple of our customers ask us about such an error message with their Canon Pixma inkjet printers, specifically the E04, E05, E14 and E15 error messages.Įssentially, these Canon Pixma error messages appear when your Pixma printer is having problems recognising one or more of the cartridges inside it. If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.There’s nothing quite like an unsolicited Canon Pixma error message when it comes to printers to make you want to either scratch your head in confusion or launch one of your limbs at a nearby wall. Plug the printer back in and turn the printer back on after it has been unplugged for a while. Table 2: Light flashes alternately between green and orange Flashesĭisconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the power supply.

#Canon ip3000 error code manual

If the problem continues after you align the print head again, tap RESUME/CANCEL to resolve the error, and then perform manual print head alignment. The reverse side won't be printed when an error occurs.Īlign the printer so the paper output slot won't be exposed directly to a strong light source.

Tap RESUME/CANCEL to discharge the paper, and restart print from the front side of the next paper. The size of paper may not be compatible with automatic duplex printing. Use a digital camera or digital video camcorder that is compatible with this printer. If the error is still unresolved, the digital camera or digital video camcorder may not be supported by the printer. Tap RESUME/CANCEL and reconnect the cable. The digital camera or digital video camcorder connected is not compatible with this printer. Tap RESUME/CANCEL to cancel the error so you can continue to print.Ī specified period of time has elapsed without a response from the digital camera or digital video camcorder. The printer has a built-in waste ink absorber for the ink used when the print head is cleaned.

Close the inner cover, then tap RESUME/CANCEL to start printing.

If this error still remains, the print head may be damaged. If the print head is already installed, remove it and check the electrical contacts for foreign matter, then reinstall.Īfter you reinstall the print head, you may need to realign it. It may damage the printer if you continue printing with an empty ink tank. Replace it with a new ink tank immediately after the printing. Tap RESUME/CANCEL continue printing with an empty ink tank. If the paper output tray is closed, open it. If paper is jammed, remove the jammed paper, reload paper in the printer, and then tap RESUME/CANCEL.

Reload paper in the sheet feeder or cassette and tap RESUME/CANCEL.

Table 1: Light flashes repeatedly orange Flashes

Repeatedly orange: If so, count the number of flashes and refer to Table 1 below.Īlternately between green and orange: If so, count the number of flashes and refer to the Table 2 below. The light(s) on your printer panel may flash as follows:

#Canon ip3000 error code code

Depending on the error, a support code error number and message may also display on your computer screen. When an error occurs you will see flashing lights on your printer panel.